REMCO RM12-12 AGM Battery
The REMCO RM12-12 is a compact sealed 12V AGM standby battery with a published 20-hour capacity of 12Ah. It is intended for compatible standby and equipment applications where its physical size, terminal type and electrical specification match the device.
Key Features
- 12V AGM standby battery.
- 12Ah at the 20-hour rate.
- Approx. 15 × 10 × 9.5 cm case size.
- Approx. 4 kg.
- T2 terminal.
- Sealed, maintenance-free AGM construction.
- Suitable only where the equipment specifies a compatible battery.
Check Fit and Application
The RM12-12 is a standby AGM battery rather than a dedicated deep-cycle mobility battery. If it is being considered for a mobility device, confirm that the device manufacturer specifically permits this model or an equivalent standby AGM specification.
Confirm Compatibility Before Replacement
REMCO RM12-12 AGM Battery should be matched by more than the voltage printed on the label. Check the required capacity, physical dimensions, terminal type and orientation against the equipment manufacturer’s specification and the battery being replaced. A case that is only slightly different in size can affect fit, cable reach or secure mounting inside the battery compartment.
Where a mobility scooter or powerchair uses a paired battery set, follow the equipment manufacturer’s replacement guidance and have the charging system checked if battery life has declined unexpectedly. Use a compatible charger, keep terminals clean and secure, and store or charge the equipment in a dry, ventilated location. A mobility technician can confirm the correct battery where application details are uncertain.
Frequently Asked Questions
What voltage is the RM12-12?
12 volts.
What is the published capacity?
12Ah at the 20-hour rate.
What battery technology does it use?
Sealed AGM standby technology.
What are the dimensions?
The current NZ specification lists approximately 15 cm long, 10 cm wide and 9.5 cm high for the battery case.
How much does it weigh?
Approximately 4 kg.
What terminal does it use?
T2.
Is it maintenance free?
Yes. It is a sealed AGM battery and does not require routine electrolyte topping up.
Is it a deep-cycle scooter battery?
No. This model is classified as an AGM standby battery. Only use it in a mobility device where the required battery specification matches.
Can it replace any 12V battery?
No. Voltage alone does not establish compatibility. Capacity, physical size, terminal type, battery technology and device requirements must match.
Should terminals be short-circuited?
No. Keep conductive objects away from the terminals and follow normal battery handling precautions.
Can it be charged with any charger?
No. Use a charger suitable for the battery chemistry and application.
Should dimensions be checked before ordering?
Yes. Check the battery bay, terminal orientation and cable reach.
Is the REMCO RM12-12 available for delivery across New Zealand?
Yes. This battery is available for delivery throughout New Zealand.
| Feature | Details |
|---|---|
| Model | RM12-12 |
| Voltage | 12V |
| Capacity | 12Ah at 20-hour rate |
| Technology | AGM Standby |
| Dimensions | Approx. 15 × 10 × 9.5 cm |
| Terminal | T2 |
| Weight | Approx. 4 kg |
