REMCO RM12-45 AGM Battery
The REMCO RM12-45 is a sealed 12V AGM standby battery. The current NZ specification lists 45Ah at the 10-hour rate and 48.1Ah at the 20-hour rate.
Key Features
- 12V AGM standby battery.
- 45Ah at 10-hour rate.
- 48.1Ah at 20-hour rate.
- Approx. 200 x 165 x 170 mm.
- Approx. 14 kg.
- T6 terminal.
- Sealed, maintenance-free AGM construction.
- For compatible standby and equipment applications.
- Available to ship NZ-wide.
Important Application Note
The RM12-45 is currently classified as an AGM standby battery. If it is being considered for a mobility scooter or other cyclic-use device, confirm that the equipment manufacturer or service specification permits this battery type rather than assuming any 12V 45Ah battery is interchangeable.
Confirm Compatibility Before Replacement
REMCO RM12-45 Scooter Battery should be matched by more than the voltage printed on the label. Check the required capacity, physical dimensions, terminal type and orientation against the equipment manufacturer’s specification and the battery being replaced. A case that is only slightly different in size can affect fit, cable reach or secure mounting inside the battery compartment.
Where a mobility scooter or powerchair uses a paired battery set, follow the equipment manufacturer’s replacement guidance and have the charging system checked if battery life has declined unexpectedly. Use a compatible charger, keep terminals clean and secure, and store or charge the equipment in a dry, ventilated location. A mobility technician can confirm the correct battery where application details are uncertain.
Frequently Asked Questions
What voltage is the RM12-45?
12 volts.
What is its capacity?
The current NZ specification lists 45Ah at the 10-hour rate and 48.1Ah at the 20-hour rate.
What battery technology does it use?
AGM standby technology.
What are the dimensions?
Approximately 200 x 165 x 170 mm.
How much does it weigh?
Approximately 14 kg.
What terminal type is fitted?
T6.
Is it sealed?
Yes. It is a sealed maintenance-free AGM battery.
Is it a deep-cycle mobility battery?
No. The current model is classified as AGM standby, so check the equipment's battery requirements before use in a mobility device.
Can it replace any 12V 45Ah battery?
No. Check the actual required technology, capacity rating, physical size, terminal and application.
Should battery compartment dimensions be checked?
Yes. Confirm clearance, terminal orientation and cable reach before ordering.
Can it be used in a paired battery system?
Only where the equipment is designed for that arrangement and specifies a compatible battery.
What charger should be used?
Use a charger appropriate to the AGM battery and the equipment's electrical configuration.
Can it be delivered NZ-wide?
Yes. The REMCO RM12-45 is available to ship NZ-wide.
| Feature | Details |
|---|---|
| Model | RM12-45 |
| Voltage | 12V |
| Capacity | 45Ah C10; 48.1Ah C20 |
| Technology | AGM Standby |
| Dimensions | 200 x 165 x 170 mm |
| Terminal | T6 |
| Weight | Approx. 14 kg |
