Tas-Tech Chair / Bed Blocks
Tas-Tech Chair / Bed Blocks are individual pyramid-shaped furniture raisers with rounded corners, available in three recess styles and four lift heights. They can be used beneath suitable chair or bed feet when a small increase in furniture height is needed for access or transfers.
Key Features
- Three recess choices for different furniture feet or castors
- Round recess: 8 cm diameter
- Castor recess: 6.4 cm diameter, intended for 5 cm castor wheels
- Square recess: 7.7 × 7.7 cm
- Four raise heights: 5, 7.5, 10 and 15 cm
- 13 × 13 cm block footprint
- 600 kg weight limit
- MDF body with plywood top and lacquer finish
- Rounded edges and corners
- New Zealand made
Choosing and Using This Product
Measure every furniture foot or castor before choosing the recess type. All support points must use the same raise height and sit securely in the blocks so the furniture remains level and stable.
Frequently Asked Questions
What heights are available?
5 cm, 7.5 cm, 10 cm and 15 cm.
What recess shapes are available?
Round, castor and square recesses.
What size is the round recess?
8 cm diameter.
What size is the castor recess?
6.4 cm diameter, listed by Tas-Tech as suitable for 5 cm wheels.
What size is the square recess?
7.7 × 7.7 cm.
What is the block footprint?
Each block is approximately 13 × 13 cm.
What is the weight limit?
600 kg.
How much does each block weigh?
Approx. 0.5 kg at 5 cm, 0.75 kg at 7.5 cm, 1 kg at 10 cm and 1.5 kg at 15 cm.
Can I mix different heights under one item of furniture?
No. All support points should be raised evenly unless a qualified assessment specifically requires otherwise.
What should I check before use?
Make sure each furniture foot or castor sits securely in the recess and that the furniture is level and stable.
What warranty applies?
A 3-year full replacement warranty applies.
| Brand | Tas-Tech Services |
|---|---|
| Block footprint | 13 × 13 cm |
| Raise heights | 5, 7.5, 10 or 15 cm |
| Round recess | 8 cm diameter |
| Castor recess | 6.4 cm diameter (for 5 cm wheels) |
| Square recess | 7.7 × 7.7 cm |
| Maximum load | 600 kg |
| Material | MDF with plywood top |
| Finish | Professional lacquer |
| Per-block weights | 0.5 / 0.75 / 1 / 1.5 kg by height |
| Warranty | 3 years |
