Tas-Tech Double, Queen & King Bed Raisers – Sets of 2 or 3
The Tas-Tech Double, Queen & King Bed Raisers are available as either a set of 2 or a set of 3 matching raisers. Choose the quantity that matches the support layout of the bed being raised, then select the required lift height.
Each raiser is a full-width plywood support designed for larger beds including double, queen, king and super king frames. The adjustable length accommodates a range of bed widths, while the fixed bottom plate and non-slip painted leg recesses help keep the bed securely supported.
Key Features
- Available as a set of 2 or set of 3 raisers.
- All raisers in the selected set are the same lift height.
- Suitable for compatible double, queen, king and super king beds.
- Adjustable length from 115 to 170 cm per raiser.
- Four raise heights: 5, 7.5, 10 and 15 cm.
- 9 × 9 cm leg recesses.
- 600 kg weight limit.
- Slim plywood design to reduce unnecessary trip projection.
- Fixed bottom plate for stability.
- Non-slip paint inside the leg recesses.
- Professional lacquer finish.
- Manufactured in Christchurch, New Zealand.
Choosing the Correct Set
First choose whether the bed requires 2 raisers or 3 raisers to support its leg or base layout correctly. Then select the required lift height. All support points should be raised evenly so the bed remains level and stable.
Measure the distance between the bed legs, the size of each leg and the number of support points before ordering. Use the minimum extra height that achieves the required mattress or transfer height.
Frequently Asked Questions
How many raisers are included?
You can choose either a set of 2 or a set of 3 matching raisers.
Is the listed price for the whole set?
Yes. The price shown for each variant is for the complete selected set — either two raisers or three raisers.
How do I know whether I need 2 or 3 raisers?
Count the bed support points that need to be raised and check the bed's frame layout. Choose the quantity that allows all relevant supports to be raised evenly and securely.
Can I mix a set of 2 and a set of 3?
The selected set is supplied with matching raisers at one lift height. Do not mix different lift heights under the same bed.
Which bed sizes are these raisers intended for?
They are designed for compatible double, queen, king and super king beds.
What length range does each raiser cover?
Each raiser adjusts from approximately 115 cm to 170 cm.
Which raise heights are available?
5 cm, 7.5 cm, 10 cm and 15 cm.
What size are the leg recesses?
Approximately 9 × 9 cm.
What is the maximum load?
The weight limit is 600 kg.
Why is there a bottom plate?
The fixed lower plate helps stabilise the full-width raiser.
What are the recesses finished with?
The leg recesses have a non-slip painted finish to help reduce movement at the furniture feet.
Can these be used on any bed?
No. The bed's leg layout, leg size, support count and overall width must fit the selected raisers correctly.
How do I choose the lift height?
Choose the smallest lift height that achieves the intended mattress or transfer height while keeping the bed stable and level.
How should the raisers be cleaned?
The lacquered surface can be cleaned with household bleach or a suitable household cleaner; follow the cleaner instructions and dry afterwards.
What warranty applies?
A 3-year full replacement warranty applies.
| Brand | Tas-Tech Services |
|---|---|
| Quantity options | Set of 2 or set of 3 raisers |
| Suitable bed sizes | Double, Queen, King, Super King |
| Adjustable length | 115–170 cm per raiser |
| Raise heights | 5, 7.5, 10 or 15 cm |
| Leg recess | 9 × 9 cm |
| Maximum load | 600 kg |
| Material | Plywood |
| Finish | Professional lacquer with non-slip leg recesses |
| Set-of-2 supplier codes | DB50, DB75, DB100, DB150 |
| Warranty | 3 years |
