Roma Bath Grab Bar

The Roma Bath Grab Bar is a clamp-on support rail designed to provide a steady handhold when getting into or out of the bath. It attaches directly to the side of a suitable bath, so there is no need to drill into the wall or make a permanent fixing.

Made from powder-coated steel, the upright rail provides a generous gripping height while rubber contact points help protect the bath surface and improve grip at the clamp. The adjustable clamp fits bath sides from 7.5 to 18 cm wide and the rail can be removed again when it is no longer required.

Important: the Roma Bath Grab Bar is designed for downward pressure only. It should not be used for strong sideways or outward pulling forces.

Roma Bath Grab Bar – Key Features

• Clamp-On Bath Support – Provides an upright handhold at the side of the bath without permanent wall fixing.
• No Drilling Required – Useful where a permanent grab rail cannot or should not be installed.
• Adjustable Clamp – Fits suitable bath sides from 7.5 to 18 cm wide.
• Powder-Coated Steel – Strong, durable construction for everyday bathroom use.
• Rubber Contact Points – Help the clamp grip securely while reducing direct contact with the bath surface.
• Easy to Remove – Can be taken off the bath when not required.
• High Downward Load Rating – Safe working load of up to 275 kg when used as intended for downward pressure.
• Compact Upright Design – Rail measures 15 cm wide and 38 cm high.

Choosing the Right Bath Support

A clamp-on bath rail can be a practical choice when you want a removable handhold beside the bath or cannot make permanent alterations. If you need a permanently fixed support rail for broader bathroom use, see the Straight Grab Rail range.

Because bath shapes and construction vary, check that the bath edge is suitable for a clamp fitting and falls within the 7.5–18 cm clamp range before ordering.

Frequently Asked Questions

What is the Roma Bath Grab Bar used for?

It provides an upright handhold beside the bath to give extra support when stepping into or out of the bath.

Does it need to be screwed to the wall?

No. The rail clamps directly to a suitable bath side, so no wall drilling or permanent fixing is required.

What bath thickness will it fit?

The adjustable clamp suits bath sides from approximately 7.5 to 18 cm wide.

How high is the grab bar?

The bar is approximately 38 cm high and 15 cm wide.

What is the safe working load?

The safe working load is 275 kg when the rail is correctly fitted and used for downward pressure as intended.

Can I pull sideways on the rail?

No. This grab bar is specifically designed for downward pressure only and should not be relied on for strong sideways or outward pulling forces.

Will the clamp mark the bath?

The clamp includes rubber contact points that help reduce direct contact with the bath surface. As bath materials and finishes vary, the fitting should still be checked carefully before installation and periodically during use.

Can the rail be removed?

Yes. The clamp-on design makes the rail relatively easy to install and remove without permanent alteration to the bathroom.

What is the grab bar made from?

It is made from powder-coated steel.

Is it suitable for every bath?

No. The bath edge needs to be structurally suitable for a clamp fitting and within the 7.5–18 cm clamp range. If you are unsure whether it will suit your bath, contact MoveSmart before ordering.

Is a clamp-on rail the same as a permanently fixed grab rail?

No. A clamp-on rail is removable and attaches to the bath itself, while a fixed grab rail is permanently secured to suitable structural backing. The best option depends on the bathroom layout and the type of support required.

Can the Roma Bath Grab Bar be delivered across New Zealand?

Yes. The Roma Bath Grab Bar is available for delivery throughout New Zealand. If you would like help checking suitability before ordering, please contact MoveSmart.