Viking Folding Shower Seat

Viking Wall-Mounted Folding Shower Seat

The Viking Folding Shower Seat is a wall-mounted stainless-steel shower seat with a wipe-clean PVC top. It folds upward when not in use, leaving approximately 130 mm projection from the wall in the folded position.

Standard or Padded Viking Shower Seat?

Choose this standard model when you want the simpler wipe-clean PVC seat surface. The Viking Folding Padded Shower Seat uses the same wall-mounted folding concept but adds a sealed waterproof padded surface for users who prefer extra cushioning.

Key Features

• 130 kg maximum user weight.
• Wall-mounted folding design.
• Stainless-steel frame.
• Easy-clean PVC seat top.
• Approx. 800 mm wide x 320 mm deep seat.
• Approx. 450 mm overall depth when lowered.
• Approx. 130 mm folded depth.
• Listed to S4121 NZ standard compliance.
• Must be installed by a suitably qualified person into sound wall construction.

Viking Folding Shower Seat Manual

Installation Matters

The wall structure and fixings carry the user's load, so correct installation is essential. The seat should only be installed into a suitable structurally sound wall using fixings appropriate to the wall construction.

Comfortable Positioning in the Shower

Viking Folding Shower Seat can make washing more manageable by providing a defined seated position and reducing the time a person needs to remain standing on a wet surface. When choosing a shower seat, consider the user’s preferred transfer direction, the amount of trunk or arm support required, and whether a caregiver needs room to assist from the front or side.

Measure the shower area carefully, including door openings, wall clearances and the location of taps or screens. Height-adjustable models should be set level, with every adjustment point fully engaged. Wall-mounted products require installation into a structurally suitable surface by a competent installer. Keep rubber feet or contact surfaces clean and inspect the seat regularly so it remains stable during everyday use.

Frequently Asked Questions

What is the maximum user weight?

The maximum user weight is 130 kg when the seat is correctly installed in suitable wall construction.

What size is the seat?

The sitting surface is approximately 800 mm wide x 320 mm deep.

How far does it project when lowered?

The overall depth is approximately 450 mm.

How far does it project when folded up?

Approximately 130 mm from the wall.

What is the difference between this and the padded Viking shower seat?

This standard version has a wipe-clean PVC seat top. The padded version adds a sealed waterproof cushioned surface while retaining the folding wall-mounted design.

What is the frame made from?

Stainless steel.

Does it fold against the wall?

Yes. The seat folds upward to reduce the space it occupies when not required.

Can I install it myself?

Professional installation is recommended. The wall construction and fixings must be suitable for the load.

Will it work on any bathroom wall?

No. A structurally suitable mounting surface is required. Wall linings alone may not provide adequate support.

Is it freestanding?

No. It is a wall-mounted shower seat and depends on correct structural fixing.

Is there a manual?

Yes. The Viking Folding Shower Seat manual is linked above.

Should the fixings be checked over time?

Yes. Inspect the seat and installation regularly and stop using it if there is movement, corrosion, damage or looseness.

Is the Viking Folding Shower Seat available for delivery across New Zealand?

Yes. This shower seat is available for delivery throughout New Zealand.