Viking Transfer Bench

The Viking Transfer Bench provides a stable seated platform for getting into and out of a bath or shower when stepping over the bath edge is difficult. Instead of relying on a large standing step, the user can sit on the outer section of the bench and move sideways across the seat into the bathing area.

Its lightweight, non-corrosive aluminium frame is designed for wet bathroom environments, while the broad plastic seat and back support have an anti-slip surface for added security. Suction feet help hold the bench firmly in position, and the backrest can be fitted on either the left or right side to suit the bathroom layout and direction of transfer.

The seat height adjusts from 470 to 585 mm, with a 130 kg safe working load. With an 800 mm wide seat and 670 mm internal leg width, the Viking offers a practical transfer solution for suitable baths and shower areas where a standard bath seat or shower chair does not address the difficulty of crossing the bath edge.

Viking Transfer Bench – Key Features

• Supports Sideways Bath Transfers – Provides a long seated platform so the user can sit first and move laterally across the bath edge.
• Lightweight Aluminium Frame – Non-corrosive construction is well suited to regular bathroom use.
• Anti-Slip Plastic Seat and Back – Easy-clean surfaces provide a secure and practical seating area.
• Reversible Backrest – The backrest can be fitted on either side to suit left- or right-side access and different bathroom layouts.
• Adjustable Seat Height – Seat height adjusts from 470 to 585 mm.
• Suction Feet – Help provide secure positioning on suitable smooth bathroom surfaces.
• 130 kg Safe Working Load – Designed for dependable everyday use within its rated capacity.
• Wide Transfer Surface – The seat measures approximately 800 mm wide x 370 mm deep.
• Optional Extra-Long Leg Available – Cubro's optional 5034 leg can extend the maximum clearance from 490 mm to approximately 590 mm where required.

Viking or Chevron Transfer Bench?

Both the Viking and Chevron Padded Transfer Bench are designed to help with lateral transfers into and out of a suitable bath or shower, and both have a 130 kg safe working load.

The Viking Transfer Bench uses a broad, easy-clean plastic seat and backrest with suction feet and a lightweight aluminium frame. The Chevron provides a padded seat and backrest and includes a side arm to assist with transfer and positioning. The best choice depends on the user's transfer method, comfort requirements and the dimensions of the bathroom.

If the user can already step into the bath and only needs a supported seated position, the Bathtub Seat may be a simpler option. For a level-access shower where crossing a bath edge is not required, see the Shower Chair with or without Arms.

Always measure the bath height, bath-edge clearance, available floor space and access direction before ordering a transfer bench.

Frequently Asked Questions

What is the Viking Transfer Bench used for?

It is designed to help a person transfer into or out of a suitable bath or shower while seated, reducing the need to step directly over the bath edge while standing.

How do you use a bath transfer bench?

The user typically sits on the outer end of the bench, moves backwards onto the seat, then turns and brings the legs across the bath edge. The exact transfer method should suit the individual's mobility and bathroom setup.

What is the safe working load?

The Viking Transfer Bench has a 130 kg safe working load.

Is the seat height adjustable?

Yes. The seat height adjusts from approximately 470 to 585 mm.

What size is the seat?

The plastic seat measures approximately 800 mm wide x 370 mm deep.

What are the overall dimensions?

The bench measures approximately 845 mm wide x 500 mm deep, with an overall height of approximately 825 to 940 mm depending on adjustment.

What is the clearance height?

Standard clearance height is approximately 380 to 490 mm. This is an important measurement to compare with the bath edge before ordering.

Can the clearance be increased for a higher bath?

Yes. An optional Cubro extra-long leg, code 5034, can increase the maximum clearance to approximately 590 mm. Suitability still needs to be checked against the specific bathroom layout.

Can the backrest be fitted on either side?

Yes. The backrest is removable and can be fitted to either the left or right side to suit the direction of transfer and bathroom layout.

Does the Viking Transfer Bench have suction feet?

Yes. It uses anti-slip suction feet to help provide secure positioning on suitable smooth surfaces.

What is the frame made from?

The frame is made from lightweight, non-corrosive aluminium.

How much does the transfer bench weigh?

The product weight is approximately 5.2 kg.

What is the internal leg width?

The internal leg width is approximately 670 mm.

Is the Viking Transfer Bench padded?

No. It uses an easy-clean plastic seat and back support with an anti-slip surface. If padding is preferred, consider the Chevron Padded Transfer Bench.

Is a transfer bench the same as a bath seat?

No. A bath seat mainly provides a seated position once the person is over or within the bath. A transfer bench extends across the bath edge so it can assist with the process of getting into and out of the bathing area.

Will it fit every bath?

No. Bath height, edge shape, available floor space and surrounding fixtures all affect fit. Check the bench dimensions and clearance carefully before ordering.

Can the Viking Transfer Bench be delivered throughout New Zealand?

Yes. The Viking Transfer Bench is available for delivery throughout New Zealand. If you would like help checking dimensions or comparing bathroom transfer options, please contact MoveSmart.